Industrial Managed Ethernet Switch w/ Enhanced G.8032 Ring, 8x 10/100/1000T L2+ 8x PoE at/af , Dual 44~56VDC input

•  Support IEEE802.3at/af up to 30W per port
•  PoE management incl, Detection and Scheduling
•  Enhanced G.8032 ring protection < 20ms for single ring. Supports auto mode**, enhanced mode, train mode** multi-VLAN** and basic mode; Enhanced G.8032 ring covers multicast packets; MSTP 8/16**MSTI /RSTP ; support MRP ring**
•  Miss-wiring avoidance & node failure protection
•  User friendly UI, including auto topology drawing; Complete CLI.
•  Support LACP link aggregation, IGMP v3/router port, DHCP server & DHCP Option82; Port based DHCP distribution, Mac based DHCP server, QoS by VLAN**, SSH/SSL, HTTPS, INGRESS ACL L2/L3,TACACS+, QinQ**, SMS**
•  Dual 9.5V~56VDC input(12V model) or Dual 44~56VDC input(48V model)
•  N-key ** for configuration restore, backup and firmware upgrade
•  Optional Environmental monitoring function to display inside switch info incl. temperature, voltage, current, power consumption
  
  
  

OVERVIEW

Lantech IPGS-3008 is a high performance L2+ all Gigabit switch with 8 10/100/1000T w/8 PoE 802.3af/at Injectors which provides L2 wire speed and advanced security function for network aggregation deployment. It delivers ITU G.8032 enhanced ring recovery less than 20ms in single ring while also supports train ring, enhanced mode, multiple VLAN model with easy configuration. The comprehensive QoS, QoS by VLAN**, advanced security including INGRESS ACL L2/L3, TACACS+, SSH/SSL, Mac based DHCP server, DHCP Option 82, DHCP server, IGMPv1/v2/v3/router port, QinQ** are supported and also required in large network. It also supports Cisco Discovery Protocol (CDP) for Ciscoworks to detect the switch info and show on L2 map topology.

Miss-wiring avoidance, Repowered auto ring restore, Loop protection
The IPGS-3008 also embedded several features for stronger and reliable network protection in an easy and intuitive way. When the pre-set ring configuration failed or looped by miss-wiring, Lantech IPGS-3008 is able to alert with the LED indicator and disable ring automatically. Repowered auto ring restore function (node failure protection) ensures the switches in a ring to survive after power breakout is back. The status can be shown in NMS when each switch is back. Loop protection is also available to prevent the generation of broadcast storm when a dumb switch is inserted in a closed loop connection.

Loop protection; Auto ring repowered restore; Alert by email, trap, SMS**
The IPGS-3008 also embedded several features for stronger and reliable network protection in an easy and intuitive way. When the pre-set ring configuration failed or looped by miss-wiring, Lantech IPGS-3008 is able to alert with the LED indicator and send out an email, trap or a SMS** text. Repowered auto ring restore function (node failure protection) ensures the switches in a ring to survive after power breakout is back. The status can be shown in NMS when each switch is back. This feature prevents the broken ring and keep ring alive without any re-configuration needed. Loop protection is also available to prevent the generation of broadcast storm when a dumb switch is inserted in a closed loop connection.

User friendly GUI, Auto topology drawing
The user friendly UI, innovative auto topology drawing and topology demo makes IPGS-3008 much easier to get hands-on. The complete CLI enables professional engineer to configure setting by command line.

Enhanced G.8032 ring, 8/16** MSTI MSTP; Optional MRP ring**
Lantech IPGS-3008 features enhanced G.8032 ring which can be self-healed in less than 20ms for single ring topology protection covering multicast packets. It also supports various ring topologies that covers multi-chain (under enhanced ring), train ring**, basic ring, multiple-VLAN ring** and auto-ring** by easy setup than others. The innovative auto-Ring** configurator (auto mode) can calculate owner and neighbor in one step. It supports MSTP that allows each spanning tree for each VLAN for redundant links with 8/16** MSTI.

Optional MRP (Media Redundancy Protocol) can be supported for industrial automation networks.

DHCP option 82 & Port based, Mac based DHCP, Option66**, IPv6 DHCP server**
DHCP server can assign dedicated IP address by MAC or by port (Port based for single switch) , it also can assign IP address by port for multiple switches with single DHCP option82 server. DHCP Option66 server can offer IP address of TFTP server to DHCP client for VOIP application. Optional IPv6 address resolution for DHCP service can be supported.

QoS by VLAN** for legacy device
QoS by VLAN** can allow switch to tag QoS by VLAN** regardless the devices acknowledge QoS or not in which greatly enhance the bandwidth management in a network.

QinQ**, QoS QinQ** and GVRP supported
It supports the QinQ**, QoS QinQ**, GVRP for large VLAN segmentation.

IGMPv3, GMRP, router port, static multicast forwarding and multicast Ring protection
The unique multicast protection under enhanced G.8032 ring can offer immediate self-recovery instead of waiting for IGMP table timeout. It also supports IGMPv3, GMRP, router port and static multicast forwarding binding by ports for video surveillance application.

Editable configuration text file; Factory reset button; CPU watchdog
The configuration file of Lantech IPGS-3204MGSFP can be exported in text file so that it can be edited and configured back to switch with ease for mass deployment. Factory reset button can restore the setting back to factory default and built-in watchdog design can automatically reboot the switch when CPU is found dead. IPGS-3008 also supports dual image firmware function**

Optional N-key for back up, restore configuration and upgrade firmware
With N-key**, the configuration file can be mass auto backup, editable restored and auto upgrade firmware for easy maintenance.

Event log & message; 2 DI + 2DO
In case of event, the IPGS-3008 is able to send an email & SMS** text message to pre-defined addresses as well as SNMP Traps out immediately. It provides 2DI and 2DO. When disconnection of the specific port was detected; DO will activate the signal LED to alarm. DI can integrate the sensors for events and DO will trigger the alarm while sending alert information to IP network with email and traps.

Relay alarm and email/trap/SMS** alerting
Featured with relay contact alarm function, the IPGS-3008 is able to connect with alarm system in case of power failure and port disconnection. In case of such event, it will send out email, SMS**, trap alerting to predefined users.

Dual 12V~48V input with boost technology to 54V PoE output for 12V model, PoE budget 80W
Lantech IPGS-3008-12V is designed with dual input power at 9.5V~56VDC while IPGS-3008-48V allows with 44~56VDC input. The PoE budget for 12V input is 80W and for 24V input is 120W.

Industrial hardened design for extended temperature operation
Lantech IPGS-3008 features high reliability and robustness coping with extensive EMI/RFI phenomenon, environmental vibration and shocks usually found in factory, substation, steel automation, aviation, mining and process control. It is the best solution for Automation, transportation, surveillance, Wireless backhaul, Semi-conductor factory and assembly lines.

Environmental monitoring for switch inside information
The environmental monitoring can detect switch overall temperature, voltage and current where can send the SNMP traps, email and SMS** alert when abnormal.

The -E model can be used in extreme environments with an operating temperature range of -40°C to 75°C.

Editable configuration file
Optional N key auto backup, Exported text file
The configuration file of Lantech IPGS-3008 can be exported and edited with word processor for the other switches configuration with ease. The optional N-key configurator offers firmware upgrade, auto backup/ editable configuration restore without computer by adjusting the DIP switch.

FEATURES

• 8 10/100/1000T w/8 PoE 802.3af/at Injectors (Total 8 Ports Switch)
• Embedded 8 PoE Injectors IEEE802.3af/at function to feed power up to 30W@54V; 15W @ 48V per port for active operation
• Dual 9.5V~56VDC power input for 12V model with PoE budget 80W at 12V input, 120W at 24V input
• Dual 45V~56VDC power input for 48V model with PoE budget 240W
• PoE management including PoE detection and scheduling for PD (power devices)
• Back-plane (Switching Fabric): 16Gbps
• 16K MAC address table
• 10KB Jumbo frame supported
• User friendly UI, auto topology drawing, topology demo, complete CLI for professional setting
• Enhanced G.8032 Ring protection in 20ms (single ring)
  • Support various ring/chain topologies, including train ring**, enhanced ring, basic ring, auto ring ** & multiple VLAN ring**
  • Enhanced G.8032 ring configuration with ease
  • Auto ring** configuration(auto mode) for single ring
  • Cover multicast and data packets protection
• Provides EFT/SURGE protection ±2000 VDC for power line
• Supports ±4000 VDC (Contact) and ±8000 VDC (Air) Ethernet ESD protection
• Built-in RTC (Real Time Clock) to keep track of time
• Supports IEEE 802.1p Class of Service, per port provides 8 priority queues Port base, Tag Base and Type of Service Priority
• IEEE 802.1d STP**, IEEE 802.1w RSTP,802.1s MSTP VLAN redundancy with 8/16** MSTI
• 4K 802.1Q VLAN, Port based VLAN, GVRP, QinQ**, QoS QinQ**
• Supports IEEE 802.1ab LLDP, Cisco CDP; LLDP info can be viewed via Web/ Console
• DHCP server / client / DHCP Option 82 relay / DHCP Option 82 server; Port based DHCP server; DHCP Option 66**; IPv6 address resolution for DHCP server**
• Bandwidth Control
  • Ingress packet filter
  • Broadcast/multicast packet filter control
• Relay alarm output system events
• Miss-wiring avoidance
  • LED indicator
• Repowered auto ring restore
  • Ensure the switches in a ring to survive after power breakout is back
  • The status can be shown in NMS when each switch is back
• TFTP/SFTP**/HTTP firmware upgrade
• Configuration backup and restoration
  • Supports editable configuration file for system quick installation
  • N-key** for mass configuration auto-backup, editable restoration and auto firmware upgrade
• System Event Log, SMTP Email alert, SMS** mobile (text) and SNMP Trap for alarm support; 32 RMON counters
• Security
  • SSL/SSH/INGRESS ACL L2/L3
  • Port Security: MAC address entries/Filter/static MAC-Port binding
  • IP Security: IP address security management to prevent unauthorized intruder.
  • TACACS+
  • Login Security: IEEE802.1X/RADIUS
  • HTTPS for secure access to the web interface
• Static multicast forwarding forward reversed IGMP flow with multicast packets binding with ports for IP surveillance application
• Multicast static forwarding for non- IGMP camera to prevent flooding; IGMP router port to assign query in ring and for reversed multicast video flow
• IGMPv1,v2,v3 with Query mode for multimedia; GMRP
• Dual image firmware support**
• Factory reset button to restore setting to factory default
• Optional environmental monitoring for system input voltage, current, ambient temperature
• Watchdog design to auto reboot switch CPU is found dead
• IP30 metal housing with DIN rail and Wall-mount** design
  
  *Future Release
  **Optional