Loading... Please wait...
  • Gift Certificates
  • My Account 

Currency Displayed in

Ubiquiti PtPtP NanoBridge Link 5.8Ghz N 25dBi 300Mbps

Hover over image to zoom

  • Image 1
Calculated at checkout

 Product Description

Fast, Point-to-Point-to-Point Solution

This Point-to-Point-to-Point (PtPtP) product is ideal for applications where:

  • You have no clear Line of Sight (LOS) and need to pass data through a mid-point, or
  • You want to join 3 locations and pass data among all three.

Here is What You Get

  • 4 x Ubiquiti NanoBridgeM5 25dBi unit. The Rocket is high performance, two-antenna (MIMO), Wireless-N unit. It will accept single antenna (SISO) connections.
  • 4 x Ubiquiti POE injectors, with AC power cords.
  • 4 x 20m External, Grounded POE cables.
  • 1 x 2m External, Grounded Cross Communication Cable
  • 4 x Configuration and testing. We configure all 4 units into a PtPtP bridge link and test.


  • You have no clear Line of Sight (LOS) and need to pass data through a mid-point. The mid-point will have LOS to each of the two end-points. In some cases the mid-point may be a hill-top or a building between the two end-points.
  • You want to join 3 locations and pass data among all three. The ethernet port at each of the three nodes is available to pass data so you could join three building LANs with this product.


  • 25+ km max. range per hop. Clear Line of Sight (LOS) required between the antennas.
  • 300 Mbps max connect speed, giving a TCP/IP throughput of 150 Mbps 
  • Easy pointing. All devices have an external LED display giving the received signal level.
  • Layer 2 bridge link. This is not a routed link - meaning you are effectively joining two buildings into one virtual LAN. LAN protocols like DHCP and Microsoft Networking work across the bridge without any configuration. Because the PowerStation units are effectively 2-port learning network switches, they do not pass unnecessary LAN traffic to the other building. That is, LAN traffic between PCs in Building 1 does not flow over the wireless link into Building 2; maximising available bandwidth and performance.
  • Outdoor use.
  • Supplied with mast mounting kits.
  • Maximum legal power for Australia. You can not deploy a more powerful WiFi system in Australia.
  • Cisco™ VLAN and VoIP compatible. This product is compatible with Cisco™ VLAN and VoIP products.

Default Configuration

This is the default configuration that we ship. If you prefer any of these values changed for your order, just tell us in the comments part of your order.

  • WiFi mode: WDS.
  • WiFi channel: 152 (5760 MHz)
  • Channel width: 40 MHz
  • TCP/IP address: and Note: these do NOT have to match the network addresses you are using on your LAN. In fact, it is much better if they are not part of your LAN address space. The only time you would want to change these is if you ALREADY are using these addresses on your network and they would clash.
  • TCP/IP subnet mask:
  • Encryption: WPA2-AES
  • Login: We leave the login/password at factory default (ubnt/ubnt). You then change the password when the equipment is installed.

 Find Similar Products by Category

You Recently Viewed...


What's News


Copyright 2020 Tang Computers Pty Ltd. All Rights Reserved.
Sitemap | BigCommerce Premium Themes by PSDCenter